研究园简易版 · 经典书籍 · 期刊文章 · 有原文 · 完整版(可多选筛选、搜索) · 首页
2017 年的期刊文章 · 第 20 页
共 1233 篇,按发表时间排,新的在前,每页 40 篇。这一页是 2017-04-01 到 2017-03-15。
按期刊、按主题看 →
AoS High-Dimensional · 发表于 2017-04-01
Jun Li, Ping-Shou Zhong
摘要
The paper considers the problem of recovering the sparse different components between two high-dimensional means of column-wise dependent random vectors. We show that dependence can be utilized to lower the identification boundary for signal recovery. Moreover, an optimal convergence rate for the marginal false nondiscovery rate (mFNR) is established under dependence. The convergence rate is faster than the optimal rate without dependence. To recover the sparse signal bearing dimensions, we propose a Dependence-Assisted Thresholding and Excising (DATE) procedure, which is shown to be rate optimal for the mFNR with the marginal false discovery rate (mFDR) controlled at a pre-specified level. Extensions of the DATE to recover the differences in contrasts among multiple population means and differences between two covariance matrices are also provided. Simulation studies and case study are given to demonstrate the performance of the proposed signal identification procedure.
AoS Other · 发表于 2017-04-01
Hanyuan Hang, Ingo Steinwart
摘要
We establish a Bernstein-type inequality for a class of stochastic processes that includes the classical geometrically $\phi$-mixing processes, Rio’s generalization of these processes and many time-discrete dynamical systems. Modulo a logarithmic factor and some constants, our Bernstein-type inequality coincides with the classical Bernstein inequality for i.i.d. data. We further use this new Bernstein-type inequality to derive an oracle inequality for generic regularized empirical risk minimization algorithms and data generated by such processes. Applying this oracle inequality to support vector machines using the Gaussian kernels for binary classification, we obtain essentially the same rate as for i.i.d. processes, and for least squares and quantile regression; it turns out that the resulting learning rates match, up to some arbitrarily small extra term in the exponent, the optimal rates for i.i.d. processes.
Biometrics High-Dimensional Testing & Uncertainty · 发表于 2017-03-31
Jinyuan Chang, Chao Zheng, Wen-Xin Zhou, Wen Zhou
摘要
Summary: In this article, we study the problem of testing the mean vectors of high dimensional data in both one-sample and two-sample cases. The proposed testing procedures employ maximum-type statistics and the parametric bootstrap techniques to compute the critical values. Different from the existing tests that heavily rely on the structural conditions on the unknown covariance matrices, the proposed tests allow general covariance structures of the data and therefore enjoy wide scope of applicability in practice. To enhance powers of the tests against sparse alternatives, we further propose two-step procedures with a preliminary feature screening step. Theoretical properties of the proposed tests are investigated. Through extensive numerical experiments on synthetic data sets and an human acute lymphoblastic leukemia gene expression data set, we illustrate the performance of the new tests and how they may provide assistance on detecting disease-associated gene-sets. The proposed methods have been implemented in an R-package HDtest and are available on CRAN.
JASA Causal Inference · 发表于 2017-03-31
Kristin A. Linn, Eric B. Laber, Leonard A. Stefanski
摘要
A dynamic treatment regime is a sequence of decision rules, each of which recommends treatment based on features of patient medical history such as past treatments and outcomes. Existing methods for estimating optimal dynamic treatment regimes from data optimize the mean of a response variable. However, the mean may not always be the most appropriate summary of performance. We derive estimators of decision rules for optimizing probabilities and quantiles computed with respect to the response distribution for two-stage, binary treatment settings. This enables estimation of dynamic treatment regimes that optimize the cumulative distribution function of the response at a prespecified point or a prespecified quantile of the response distribution such as the median. The proposed methods perform favorably in simulation experiments. We illustrate our approach with data from a sequentially randomized trial where the primary outcome is remission of depression symptoms. *(abstract via PubMed)*
JASA High-Dimensional · 发表于 2017-03-30
Shujie Ma, Runze Li, Chih-Ling Tsai
摘要
In quantile linear regression with ultra-high dimensional data, we propose an algorithm for screening all candidate variables and subsequently selecting relevant predictors. Specifically, we first employ quantile partial correlation for screening, and then we apply the extended Bayesian information criterion (EBIC) for best subset selection. Our proposed method can successfully select predictors when the variables are highly correlated, and it can also identify variables that make a contribution to the conditional quantiles but are marginally uncorrelated or weakly correlated with the response. Theoretical results show that the proposed algorithm can yield the sure screening set. By controlling the false selection rate, model selection consistency can be achieved theoretically. In practice, we proposed using EBIC for best subset selection so that the resulting model is screening consistent. Simulation studies demonstrate that the proposed algorithm performs well, and an empirical example is presented. *(abstract via PubMed)*
JASA Spatial & Time Series · 发表于 2017-03-30
Alexander Schnurr, Herold Dehling
摘要
We propose new concepts to analyze and model the dependence structure between two time series. Our methods rely exclusively on the order structure of the data points. Hence, the methods are stable under monotone transformations of the time series and robust against small perturbations or measurement errors. Ordinal pattern dependence can be characterized by four parameters. We propose estimators for these parameters, and we calculate their asymptotic distributions. Furthermore, we derive a test for structural breaks within the dependence structure. All results are supplemented by simulation studies and empirical examples. For three consecutive data points attaining different values, there are six possibilities how their values can be ordered. These possibilities are called ordinal patterns. Our first idea is simply to count the number of coincidences of patterns in both time series and to compare this with the expected number in the case of independence. If we detect a lot of coincident patterns, it would indicate that the up-and-down behavior is similar. Hence, our concept can be seen as a way to measure nonlinear “correlation.” We show in the last section how to generalize the concept to capture various other kinds of dependence. *(abstract via OpenAlex)*
JASA Survival Analysis Nonparametric & Semiparametric · 发表于 2017-03-30
Yijian Huang
摘要
Dynamic regression models, including the quantile regression model and Aalen's additive hazards model, are widely adopted to investigate evolving covariate effects. Yet lack of monotonicity respecting with standard estimation procedures remains an outstanding issue. Advances have recently been made, but none provides a complete resolution. In this article, we propose a novel adaptive interpolation method to restore monotonicity respecting, by successively identifying and then interpolating nearest monotonicity-respecting points of an original estimator. Under mild regularity conditions, the resulting regression coefficient estimator is shown to be asymptotically equivalent to the original. Our numerical studies have demonstrated that the proposed estimator is much more smooth and may have better finite-sample efficiency than the original as well as, when available as only in special cases, other competing monotonicity-respecting estimators. Illustration with a clinical study is provided. *(abstract via PubMed)*
SiM Networks & Graphs Longitudinal Data · 发表于 2017-03-30
Duy Vu, Alessandro Lomi, Daniele Mascia, Francesca Pallotti
摘要
The main objective of this paper is to introduce and illustrate relational event models, a new class of statistical models for the analysis of time‐stamped data with complex temporal and relational dependencies. We outline the main differences between recently proposed relational event models and more conventional network models based on the graph‐theoretic formalism typically adopted in empirical studies of social networks. Our main contribution involves the definition and implementation of a marked point process extension of currently available models. According to this approach, the sequence of events of interest is decomposed into two components: (a) event time and (b) event destination. This decomposition transforms the problem of selection of event destination in relational event models into a conditional multinomial logistic regression problem. The main advantages of this formulation are the possibility of controlling for the effect of event‐specific data and a significant reduction in the estimation time of currently available relational event models. We demonstrate the empirical value of the model in an analysis of interhospital patient transfers within a regional community of health care organizations. We conclude with a discussion of how the models we presented help to overcome some the limitations of statistical models for networks that are currently available. Copyright © 2017 John Wiley & Sons, Ltd.
SiM Latent Variables & Mixtures · 发表于 2017-03-30
Rebecca Walwyn, Chris Roberts
摘要
In meta‐analyses, where a continuous outcome is measured with different scales or standards, the summary statistic is the mean difference standardised to a common metric with a common variance. Where trial treatment is delivered by a person, nesting of patients within care providers leads to clustering that may interact with, or be limited to, one or more of the arms. Assuming a common standardising variance is less tenable and options for scaling the mean difference become numerous. Metrics suggested for cluster‐randomised trials are within, between and total variances and for unequal variances, the control arm or pooled variances. We consider summary measures and individual‐patient‐data methods for meta‐analysing standardised mean differences from trials with two‐level nested clustering, relaxing independence and common variance assumptions, allowing sample sizes to differ across arms. A general metric is proposed with comparable interpretation across designs. The relationship between the method of standardisation and choice of model is explored, allowing for bias in the estimator and imprecision in the standardising metric. A meta‐analysis of trials of counselling in primary care motivated this work. Assuming equal clustering effects across trials, the proposed random‐effects meta‐analysis model gave a pooled standardised mean difference of −0.27 (95% CI −0.45 to −0.08) using summary measures and −0.26 (95% CI −0.45 to −0.09) with the individual‐patient‐data. While treatment‐related clustering has rarely been taken into account in trials, it is now recommended that it is considered in trials and meta‐analyses. This paper contributes to the uptake of this guidance. Copyright © 2016 John Wiley & Sons, Ltd.
JASA Other · 发表于 2017-03-30
David S. Matteson, Ruey S. Tsay
摘要
This article introduces a novel statistical framework for independent component analysis (ICA) of multivariate data. We propose methodology for estimating mutually independent components, and a versatile resampling-based procedure for inference, including misspecification testing. Independent components are estimated by combining a nonparametric probability integral transformation with a generalized nonparametric whitening method based on distance covariance that simultaneously minimizes all forms of dependence among the components. We prove the consistency of our estimator under minimal regularity conditions and detail conditions for consistency under model misspecification, all while placing assumptions on the observations directly, not on the latent components. U statistics of certain Euclidean distances between sample elements are combined to construct a test statistic for mutually independent components. The proposed measures and tests are based on both necessary and sufficient conditions for mutual independence. We demonstrate the improvements of the proposed method over several competing methods in simulation studies, and we apply the proposed ICA approach to two real examples and contrast it with principal component analysis. *(abstract via OpenAlex)*
JASA Other · 发表于 2017-03-30
Vikram V. Garg, Roy H. Stogner
摘要
Latin hypercube sampling (LHS) is a robust, scalable Monte Carlo method that is used in many areas of science and engineering. We present a new algorithm for generating hierarchic Latin hypercube sets (HLHS) that are recursively divisible into LHS subsets. Based on this new construction, we introduce a hierarchical incremental LHS (HILHS) method that allows the user to employ LHS in a flexibly incremental setting. This overcomes a drawback of many LHS schemes that require the entire sample set to be selected a priori, or only allow very large increments. We derive the sampling properties for HLHS designs and HILHS estimators. We also present numerical studies that showcase the flexible incrementation offered by HILHS. *(abstract via OpenAlex)*
JASA Other · 发表于 2017-03-30
Ruiyan Luo, Xin Qi
摘要
We consider functional linear regression models with a functional response and multiple functional predictors, with the goal of finding the best finite-dimensional approximation to the signal part of the response function. Defining the integrated squared correlation coefficient between a random variable and a random function, we propose to solve a penalized generalized functional eigenvalue problem, whose solutions satisfy that projections on the original predictors generate new scalar uncorrelated variables and these variables have the largest integrated squared correlation coefficient with the signal function. With these new variables, we transform the original function-on-function regression model to a function-on-scalar regression model whose predictors are uncorrelated, and estimate the model by penalized least-square method. This method is also extended to models with both multiple functional and scalar predictors. We provide the asymptotic consistency and the corresponding convergence rates for our estimates. Simulation studies in various settings and for both one and multiple functional predictors demonstrate that our approach has good predictive performance and is very computational efficient. Supplementary materials for this article are available online. *(abstract via OpenAlex)*
JASA Bayesian Methods · 发表于 2017-03-30
Mauricio Sadinle
摘要
The bipartite record linkage task consists of merging two disparate datafiles containing information on two overlapping sets of entities. This is nontrivial in the absence of unique identifiers and it is important for a wide variety of applications given that it needs to be solved whenever we have to combine information from different sources. Most statistical techniques currently used for record linkage are derived from a seminal article by Fellegi and Sunter in 1969 Fellegi, I. P., and Sunter, A. B. (1969), “A Theory for Record Linkage,” Journal of the American Statistical Association, 64, 1183–1210.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]. These techniques usually assume independence in the matching statuses of record pairs to derive estimation procedures and optimal point estimators. We argue that this independence assumption is unreasonable and instead target a bipartite matching between the two datafiles as our parameter of interest. Bayesian implementations allow us to quantify uncertainty on the matching decisions and derive a variety of point estimators using different loss functions. We propose partial Bayes estimates that allow uncertain parts of the bipartite matching to be left unresolved. We evaluate our approach to record linkage using a variety of challenging scenarios and show that it outperforms the traditional methodology. We illustrate the advantages of our methods merging two datafiles on casualties from the civil war of El Salvador. Supplementary materials for this article are available online. *(abstract via OpenAlex)*
JASA Survival Analysis Nonparametric & Semiparametric · 发表于 2017-03-30
Qingning Zhou, Tao Hu, Jianguo Sun
摘要
Interval-censored failure time data arise in a number of fields and many authors have discussed various issues related to their analysis. However, most of the existing methods are for univariate data and there exists only limited research on bivariate data, especially on regression analysis of bivariate interval-censored data. We present a class of semiparametric transformation models for the problem and for inference, a sieve maximum likelihood approach is developed. The model provides a great flexibility, in particular including the commonly used proportional hazards model as a special case, and in the approach, Bernstein polynomials are employed. The strong consistency and asymptotic normality of the resulting estimators of regression parameters are established and furthermore, the estimators are shown to be asymptotically efficient. Extensive simulation studies are conducted and indicate that the proposed method works well for practical situations. Supplementary materials for this article are available online. *(abstract via OpenAlex)*
Biometrics Econometrics & Economics Genetics & Omics · 发表于 2017-03-30
Pixu Shi, Hongzhe Li
摘要
Summary: In human microbiome studies, sequencing reads data are often summarized as counts of bacterial taxa at various taxonomic levels specified by a taxonomic tree. This article considers the problem of analyzing two repeated measurements of microbiome data from the same subjects. Such data are often collected to assess the change of microbial composition after certain treatment, or the difference in microbial compositions across body sites. Existing models for such count data are limited in modeling the covariance structure of the counts and in handling paired multinomial count data. A new probability distribution is proposed for paired-multinomial count data, which allows flexible covariance structure and can be used to model repeatedly measured multivariate count data. Based on this distribution, a test statistic is developed for testing the difference in compositions based on paired multinomial count data. The proposed test can be applied to the count data observed on a taxonomic tree in order to test difference in microbiome compositions and to identify the subtrees with different subcompositions. Simulation results indicate that proposed test has correct type 1 errors and increased power compared to some commonly used methods. An analysis of an upper respiratory tract microbiome data set is used to illustrate the proposed methods.
JASA Other · 发表于 2017-03-30
Fasheng Sun, Boxin Tang
摘要
This article presents a method of constructing a rich class of orthogonal designs that include orthogonal Latin hypercubes as special cases. Two prominent features of the method are its simplicity and generality. In addition to orthogonality, the resulting designs enjoy some attractive space-filling properties, making them very suitable for computer experiments. *(abstract via OpenAlex)*
Biometrics Spatial & Time Series · 发表于 2017-03-29
Chong Deng, Yongtao Guan, Rasmus P. Waagepetersen, Jingfei Zhang
摘要
Summary: Applications of spatial point processes for large and complex data sets with inhomogeneities as encountered, example, in tropical rain forest ecology call for estimation methods that are both statistically and computationally efficient. We propose a novel second-order quasi-likelihood procedure to estimate the parameters for a second-order intensity reweighted stationary spatial point process. Our approach is to derive first- and second-order estimating functions and then combine them linearly using appropriate weight functions. In the stationary case, we argue that the asymptotically optimal weight functions are respectively a constant and a function of lags between distinct locations in the observation window. This leads to a considerable gain in computational efficiency. We further exploit this simplification in the nonstationary case. Simulations show that, when compared with several existing approaches, our method can achieve significant gains in statistical efficiency. An application to a tropical rain forest data set further illustrates the advantages of our procedure.
SiM Longitudinal Data Bayesian Methods · 发表于 2017-03-29
Avery I. McIntosh, Gheorghe Doros, Edward C. Jones‐López, Mary Gaeddert, Helen E. Jenkins, Patricia Marques‐Rodrigues, Jerrold J. Ellner, Reynaldo Dietze, Laura F. White
摘要
Household contact studies, a mainstay of tuberculosis transmission research, often assume that tuberculosis‐infected household contacts of an index case were infected within the household. However, strain genotyping has provided evidence against this assumption. Understanding the household versus community infection dynamic is essential for designing interventions. The misattribution of infection sources can also bias household transmission predictor estimates. We present a household‐community transmission model that estimates the probability of community infection, that is, the probability that a household contact of an index case was actually infected from a source outside the home and simultaneously estimates transmission predictors. We show through simulation that our method accurately predicts the probability of community infection in several scenarios and that not accounting for community‐acquired infection in household contact studies can bias risk factor estimates. Applying the model to data from Vitória, Brazil, produced household risk factor estimates similar to two other standard methods for age and sex. However, our model gave different estimates for sleeping proximity to index case and disease severity score. These results show that estimating both the probability of community infection and household transmission predictors is feasible and that standard tuberculosis transmission models likely underestimate the risk for two important transmission predictors. Copyright © 2017 John Wiley & Sons, Ltd.
Biometrics Networks & Graphs High-Dimensional · 发表于 2017-03-29
Yunlong Nie, LiangLiang Wang, Jiguo Cao
摘要
Summary: The problem of modeling the dynamical regulation process within a gene network has been of great interest for a long time. We propose to model this dynamical system with a large number of nonlinear ordinary differential equations (ODEs), in which the regulation function is estimated directly from data without any parametric assumption. Most current research assumes the gene regulation network is static, but in reality, the connection and regulation function of the network may change with time or environment. This change is reflected in our dynamical model by allowing the regulation function varying with the gene expression and forcing this regulation function to be zero if no regulation happens. We introduce a statistical method called functional SCAD to estimate a time-varying sparse and directed gene regulation network, and simultaneously, to provide a smooth estimation of the regulation function and identify the interval in which no regulation effect exists. The finite sample performance of the proposed method is investigated in a Monte Carlo simulation study. Our method is demonstrated by estimating a time-varying directed gene regulation network of 20 genes involved in muscle development during the embryonic stage of Drosophila melanogaster.
SiM Diagnostics & Prediction Missing Data & Measurement Error · 发表于 2017-03-28
Yan Liu, Christopher McMahan, Colin Gallagher
摘要
As a cost-efficient data collection mechanism, the process of assaying pooled biospecimens is becoming increasingly common in epidemiological research; for example, pooling has been proposed for the purpose of evaluating the diagnostic efficacy of biological markers (biomarkers). To this end, several authors have proposed techniques that allow for the analysis of continuous pooled biomarker assessments. Regretfully, most of these techniques proceed under restrictive assumptions, are unable to account for the effects of measurement error, and fail to control for confounding variables. These limitations are understandably attributable to the complex structure that is inherent to measurements taken on pooled specimens. Consequently, in order to provide practitioners with the tools necessary to accurately and efficiently analyze pooled biomarker assessments, herein, a general Monte Carlo maximum likelihood-based procedure is presented. The proposed approach allows for the regression analysis of pooled data under practically all parametric models and can be used to directly account for the effects of measurement error. Through simulation, it is shown that the proposed approach can accurately and efficiently estimate all unknown parameters and is more computational efficient than existing techniques. This new methodology is further illustrated using monocyte chemotactic protein-1 data collected by the Collaborative Perinatal Project in an effort to assess the relationship between this chemokine and the risk of miscarriage. Copyright © 2017 John Wiley & Sons, Ltd. *(abstract via PubMed)*
Biometrics High-Dimensional Genetics & Omics · 发表于 2017-03-27
Tamar Sofer, Elizabeth D. Schifano, David C. Christiani, Xihong Lin
摘要
Summary: We propose a weighted pseudolikelihood method for analyzing the association of a SNP set, example, SNPs in a gene or a genetic pathway or network, with multiple secondary phenotypes in case-control genetic association studies. To boost analysis power, we assume that the SNP-specific effects are shared across all secondary phenotypes using a scaled mean model. We estimate regression parameters using Inverse Probability Weighted (IPW) estimating equations obtained from the weighted pseudolikelihood, which accounts for case-control sampling to prevent potential ascertainment bias. To test the effect of a SNP set, we propose a weighted variance component pseudo-score test. We also propose a penalized IPW pseudolikelihood method for selecting a subset of SNPs that are associated with the multiple secondary phenotypes. We show that the proposed variable selection procedure has the oracle properties and is robust to misspecification of the correlation structure among secondary phenotypes. We select the tuning parameter using a weighted Bayesian Information-like Criterion (wBIC). We evaluate the finite sample performance of the proposed methods via simulations, and illustrate the methods by the analysis of the multiple secondary smoking behavior outcomes in a lung cancer case-control genetic association study.
Biometrics Causal Inference Diagnostics & Prediction · 发表于 2017-03-27
Raiden Hasegawa, Dylan Small
摘要
Summary: In matched observational studies where treatment assignment is not randomized, sensitivity analysis helps investigators determine how sensitive their estimated treatment effect is to some unmeasured confounder. The standard approach calibrates the sensitivity analysis according to the worst case bias in a pair. This approach will result in a conservative sensitivity analysis if the worst case bias does not hold in every pair. In this paper, we show that for binary data, the standard approach can be calibrated in terms of the average bias in a pair rather than worst case bias. When the worst case bias and average bias differ, the average bias interpretation results in a less conservative sensitivity analysis and more power. In many studies, the average case calibration may also carry a more natural interpretation than the worst case calibration and may also allow researchers to incorporate additional data to establish an empirical basis with which to calibrate a sensitivity analysis. We illustrate this with a study of the effects of cellphone use on the incidence of automobile accidents. Finally, we extend the average case calibration to the sensitivity analysis of confidence intervals for attributable effects.
Biometrics Survival Analysis · 发表于 2017-03-27
Steven Abrams, Marc Aerts, Geert Molenberghs, Niel Hens
摘要
Summary: Frailty models have a prominent place in survival analysis to model univariate and multivariate time-to-event data, often complicated by the presence of different types of censoring. In recent years, frailty modeling gained popularity in infectious disease epidemiology to quantify unobserved heterogeneity using Type I interval-censored serological data or current status data. In a multivariate setting, frailty models prove useful to assess the association between infection times related to multiple distinct infections acquired by the same individual. In addition to dependence among individual infection times, overdispersion can arise when the observed variability in the data exceeds the one implied by the model. In this article, we discuss parametric overdispersed frailty models for time-to-event data under Type I interval-censoring, building upon the work by Molenberghs et al. (2010) and Hens et al. (2009). The proposed methodology is illustrated using bivariate serological data on hepatitis A and B from Flanders, Belgium anno 1993–1994. Furthermore, the relationship between individual heterogeneity and overdispersion at a stratum-specific level is studied through simulations. Although it is important to account for overdispersion, one should be cautious when modeling both individual heterogeneity and overdispersion based on current status data as model selection is hampered by the loss of information due to censoring.
Biometrics Clinical Trials · 发表于 2017-03-27
Pranab Ghosh, Lingyun Liu, P. Senchaudhuri, Ping Gao, Cyrus Mehta
摘要
Summary: Two-arm group sequential designs have been widely used for over 40 years, especially for studies with mortality endpoints. The natural generalization of such designs to trials with multiple treatment arms and a common control (MAMS designs) has, however, been implemented rarely. While the statistical methodology for this extension is clear, the main limitation has been an efficient way to perform the computations. Past efforts were hampered by algorithms that were computationally explosive. With the increasing interest in adaptive designs, platform designs, and other innovative designs that involve multiple comparisons over multiple stages, the importance of MAMS designs is growing rapidly. This article provides break-through algorithms that can compute MAMS boundaries rapidly thereby making such designs practical. For designs with efficacy-only boundaries the computational effort increases linearly with number of arms and number of stages. For designs with both efficacy and futility boundaries the computational effort doubles with successive increases in number of stages.
SiM Other · 发表于 2017-03-26
Xiaodong Luo, Junshan Qiu, Steven Bai, Hong Tian
摘要
To analyze prioritized outcomes, Buyse (2010) and Pocock et al. (2012) proposed the win loss approach. In this paper, we first study the relationship between the win loss approach and the traditional survival analysis on the time to the first event. We then propose the weighted win loss statistics to improve the efficiency of the unweighted methods. A closed-form variance estimator of the weighted win loss statistics is derived to facilitate hypothesis testing and study design. We also calculated the contribution index to better interpret the results of the weighted win loss approach. Simulation studies and real data analysis demonstrated the characteristics of the proposed statistics. Copyright © 2017 John Wiley & Sons, Ltd. *(abstract via PubMed)*
Biometrics Survival Analysis Longitudinal Data · 发表于 2017-03-23
Qing Cai, Mei-Cheng Wang, Kwun Chuen Gary Chan
摘要
Summary: Recurrent events together with longitudinal measurements are commonly observed in follow-up studies where the observation is terminated by censoring or a primary failure event. In this article, we developed a joint model where the dependence of longitudinal measurements, recurrent event process and time to failure event is modeled through rescaling the time index. The general idea is that the trajectories of all biology processes of subjects in the survivors’ population are elongated or shortened by the rate identified from a model for the failure event. To avoid making disputing assumptions on recurrent events or biomarkers after the failure event (such as death), the model is constructed on the basis of survivors’ population. The model also possesses a specific feature that, by aligning failure events as time origins, the backward-in-time model of recurrent events and longitudinal measurements shares the same parameter values with the forward time model. The statistical properties, simulation studies and real data examples are conducted. The proposed method can be generalized to analyze left-truncated data.
SMMR Other · 发表于 2017-03-23
Ilona WM Verburg, Rebecca Holman, Niels Peek, Ameen Abu-Hanna, Nicolette F de Keizer
摘要
Funnel plots are graphical tools to assess and compare clinical performance of a group of care professionals or care institutions on a quality indicator against a benchmark. Incorrect construction of funnel plots may lead to erroneous assessment and incorrect decisions potentially with severe consequences. We provide workflow-based guidance for data analysts on constructing funnel plots for the evaluation of binary quality indicators, expressed as proportions, risk-adjusted rates or standardised rates. Our guidelines assume the following steps: (1) defining policy level input; (2) checking the quality of models used for case-mix correction; (3) examining whether the number of observations per hospital is sufficient; (4) testing for overdispersion of the values of the quality indicator; (5) testing whether the values of quality indicators are associated with institutional characteristics; and (6) specifying how the funnel plot should be constructed. We illustrate our guidelines using data from the Dutch National Intensive Care Evaluation registry. We expect that our guidelines will be useful to data analysts preparing funnel plots and to registries, or other organisations publishing quality indicators. This is particularly true if these people and organisations wish to use standard operating procedures when constructing funnel plots, perhaps to comply with the demands of certification.
SiM Other · 发表于 2017-03-23
Olga M. Kuznetsova, Victoria Plamadeala Johnson
摘要
The paper discusses three methods for expanding the biased coin randomization (BCR) to unequal allocation while preserving the unconditional allocation ratio at every step. The first method originally proposed in the contexts of BCR and minimization is based on mapping from an equal allocation multi‐arm BCR. Despite the improvement proposed in this paper to ensure tighter adherence to the targeted unequal allocation, this method still distributes the probability mass at least as wide as the permuted block randomization (PBR). This works for smaller block sizes, but for larger block sizes, a tighter control of the imbalance in the treatment assignments is desired. The second method, which has two versions, allows to tighten the distribution of the imbalance compared with that achieved with the PBR. However, the distribution of the imbalance remains considerably wider than that of the brick tunnel randomization – the unequal allocation procedure with the tightest possible imbalance distribution among all allocation ratio preserving procedures with the same allocation ratio. Finally, the third method, the BCR with a preset proportion of maximal forcing, mimics the properties of the equal allocation BCR. With maximum forcing, it approaches the brick tunnel randomization, similar to how 1:1 BCR approaches 1:1 PBR with the permuted block size of 2 (the equal allocation procedure with the lowest possible imbalance) when the bias approaches 1. With minimum forcing, the BCR with a preset proportion of maximal forcing approaches complete randomization (similar to 1:1 BCR). Copyright © 2017 John Wiley & Sons, Ltd.
SiM Testing & Uncertainty · 发表于 2017-03-21
Jaakko Nevalainen, Hannu Oja, Somnath Datta
摘要
Clustered data are often encountered in biomedical studies, and to date, a number of approaches have been proposed to analyze such data. However, the phenomenon of informative cluster size (ICS) is a challenging problem, and its presence has an impact on the choice of a correct analysis methodology. For example, Dutta and Datta (2015, Biometrics) presented a number of marginal distributions that could be tested. Depending on the nature and degree of informativeness of the cluster size, these marginal distributions may differ, as do the choices of the appropriate test. In particular, they applied their new test to a periodontal data set where the plausibility of the informativeness was mentioned, but no formal test for the same was conducted. We propose bootstrap tests for testing the presence of ICS. A balanced bootstrap method is developed to successfully estimate the null distribution by merging the re‐sampled observations with closely matching counterparts. Relying on the assumption of exchangeability within clusters, the proposed procedure performs well in simulations even with a small number of clusters, at different distributions and against different alternative hypotheses, thus making it an omnibus test. We also explain how to extend the ICS test to a regression setting and thereby enhancing its practical utility. The methodologies are illustrated using the periodontal data set mentioned earlier. Copyright © 2017 John Wiley & Sons, Ltd.
SiM Survival Analysis Missing Data & Measurement Error · 发表于 2017-03-21
Nabihah Tayob, Susan Murray
摘要
The lung allocation system has reduced the number of waitlist deaths by ranking transplant candidates on the basis of a lung allocation score that requires estimation of the current 1-year restricted mean waitlist survival (urgency). Fewer waitlist deaths and the systematic removal of candidates from the waitlist for transplantation present statistical challenges that must be addressed when using recent waitlist data. Multiple overlapping 1-year follow-up windows are used in a restricted mean model that estimates patient urgency on the basis of updated risk factors at the start of the window. In simulation studies, our proposed multiple imputation procedure was able to produce unbiased parameter estimates with similar efficiency to those obtained if censoring had never occurred. The analysis of 10,740 lung transplant candidates revealed that for most risk factors incorporating additional follow-up windows produced more efficient estimates. Copyright © 2017 John Wiley & Sons, Ltd. *(abstract via PubMed)*
Biometrics Genetics & Omics · 发表于 2017-03-21
Yeonhee Park, Zhihua Su, Hongtu Zhu
摘要
Summary: Motivated by searching for associations between genetic variants and brain imaging phenotypes, the aim of this article is to develop a groupwise envelope model for multivariate linear regression in order to establish the association between both multivariate responses and covariates. The groupwise envelope model allows for both distinct regression coefficients and distinct error structures for different groups. Statistically, the proposed envelope model can dramatically improve efficiency of tests and of estimation. Theoretical properties of the proposed model are established. Numerical experiments as well as the analysis of an imaging genetic data set obtained from the Alzheimer's Disease Neuroimaging Initiative (ADNI) study show the effectiveness of the model in efficient estimation. Data used in preparation of this article were obtained from the Alzheimer's Disease Neuroimaging Initiative (ADNI) database.
Biometrika Networks & Graphs Latent Variables & Mixtures · 发表于 2017-03-19
N. Binkiewicz, J. T. Vogelstein, K. Rohe
摘要
Biological and social systems consist of myriad interacting units. The interactions can be represented in the form of a graph or network. Measurements of these graphs can reveal the underlying structure of these interactions, which provides insight into the systems that generated the graphs. Moreover, in applications such as connectomics, social networks, and genomics, graph data are accompanied by contextualizing measures on each node. We utilize these node covariates to help uncover latent communities in a graph, using a modification of spectral clustering. Statistical guarantees are provided under a joint mixture model that we call the node-contextualized stochastic blockmodel, including a bound on the misclustering rate. The bound is used to derive conditions for achieving perfect clustering. For most simulated cases, covariate-assisted spectral clustering yields results superior both to regularized spectral clustering without node covariates and to an adaptation of canonical correlation analysis. We apply our clustering method to large brain graphs derived from diffusion MRI data, using the node locations or neurological region membership as covariates. In both cases, covariate-assisted spectral clustering yields clusters that are easier to interpret neurologically. *(abstract via PubMed)*
SMMR Diagnostics & Prediction · 发表于 2017-03-17
Yingchun Zhou, Rong Huang, Shanshan Yu, Yanyuan Ma
摘要
Classification with a large number of predictors and biomarker discovery become increasingly important in biological and medical research. This paper focuses on performing classification of cardiovascular diseases based on electrocardiogram analysis which deals with many variables and a lot of measurements within variables. We propose an optimal quantile level selection procedure to reduce dimension by characterizing distributions with quantiles and combine with classification tools to produce sensible classification and biomarker discovery results. Simulation and an intensive study of a real data set are performed to illustrate the performance of the proposed method.
Biometrics Longitudinal Data Causal Inference Bayesian Methods · 发表于 2017-03-17
E. Juarez-Colunga, G. L. Silva, C. B. Dean
摘要
Summary: Panel counts are often encountered in longitudinal, such as diary, studies where individuals are followed over time and the number of events occurring in time intervals, or panels, is recorded. This article develops methods for situations where, in addition to the counts of events, a mark, denoting a measure of severity of the events, is recorded. In many situations there is an association between the panel counts and their marks. This is the case for our motivating application that studies the effect of two hormone therapy treatments in reducing counts and severities of vasomotor symptoms in women after hysterectomy/ovariectomy. We model the event counts and their severities jointly through the use of shared random effects. We also compare, through simulation, the power of testing for the treatment effect based on such joint modeling and an alternative scoring approach, which is commonly employed. The scoring approach analyzes the compound outcome of counts times weighted severity. We discuss this approach and quantify challenges which may arise in isolating the treatment effect when such a scoring approach is used. We also show that the power of detecting a treatment effect is higher when using the joint model than analysis using the scoring approach. Inference is performed via Markov chain Monte Carlo methods.
SiM Causal Inference Clinical Trials Diagnostics & Prediction · 发表于 2017-03-17
Wen Li, Cong Chen, Xiaoyun Li, Robert A. Beckman
摘要
A personalized medicine may benefit a subpopulation with certain predictive biomarker signatures or certain disease types. However, there is great uncertainty about drug activity in a subpopulation when designing a confirmatory trial in practice, and it is logical to take a two-stage approach with the study unless credible external information is available for decision-making purpose. The first stage deselects (or prunes) non-performing subpopulations at an interim analysis, and the second stage pools the remaining subpopulations in the final analysis. The endpoints used at the two stages can be different in general. A key issue of interest is the statistical property of the test statistics and point estimate at the final analysis. Previous research has focused on type I error control and power calculation for such two-stage designs. This manuscript will investigate estimation bias of the treatment effect, which is implicit in the adjustment of nominal type I error for multiplicity control in such two-stage designs. Previous work handles the treatment effect of an intermediate endpoint as a nuisance parameter to provide the most conservative type I error control. This manuscript takes the same approach to explore the bias. The methodology is applied to the two previously studied designs. In the first design, patients with different biomarker levels are enrolled in a study, and the treatment effect is assumed to be in an order. The goal of the interim analysis is to identify a biomarker cut-off point for the subpopulations. In the second design, patients with different tumour types but the same biomarker signature are included in a trial applying a basket design. The goal of the interim analysis is to identify a subset of tumour types in the absence of treatment effect ordering. Closed-form equations are provided for the estimation bias as well as the variance under the two designs. Simulations are conducted under various scenarios to validate the analytic results that demonstrated that the bias can be properly estimated in practice. Worked examples are presented. Extensions to general adaptive designs and operational considerations are discussed. Copyright © 2017 John Wiley & Sons, Ltd. *(abstract via PubMed)*
SiM Genetics & Omics · 发表于 2017-03-16
Renaud Tissier, Roula Tsonaka, Simon P. Mooijaart, Eline Slagboom, Jeanine J. Houwing‐Duistermaat
摘要
The case‐control design is often used to test associations between the case‐control status and genetic variants. In addition to this primary phenotype, a number of additional traits, known as secondary phenotypes, are routinely recorded, and typically, associations between genetic factors and these secondary traits are studied too. Analysing secondary phenotypes in case‐control studies may lead to biased genetic effect estimates, especially when the marker tested is associated with the primary phenotype and when the primary and secondary phenotypes tested are correlated. Several methods have been proposed in the literature to overcome the problem, but they are limited to case‐control studies and not directly applicable to more complex designs, such as the multiple‐cases family studies. A proper secondary phenotype analysis, in this case, is complicated by the within families correlations on top of the biased sampling design. We propose a novel approach to accommodate the ascertainment process while explicitly modelling the familial relationships. Our approach pairs existing methods for mixed‐effects models with the retrospective likelihood framework and uses a multivariate probit model to capture the association between the mixed type primary and secondary phenotypes. To examine the efficiency and bias of the estimates, we performed simulations under several scenarios for the association between the primary phenotype, secondary phenotype and genetic markers. We will illustrate the method by analysing the association between triglyceride levels and glucose (secondary phenotypes) and genetic markers from the Leiden Longevity Study, a multiple‐cases family study that investigates longevity. © 2017 The Authors.Statistics in MedicinePublished by JohnWiley & Sons Ltd.
SMMR Other · 发表于 2017-03-16
Luca Bonomi, Xiaoqian Jiang
摘要
Modern medical research relies on multi-institutional collaborations which enhance the knowledge discovery and data reuse. While these collaborations allow researchers to perform analytics otherwise impossible on individual datasets, they often pose significant challenges in the data integration process. Due to the lack of a unique identifier, data integration solutions often have to rely on patient’s protected health information (PHI). In many situations, such information cannot leave the institutions or must be strictly protected. Furthermore, the presence of noisy values for these attributes may result in poor overall utility. While much research has been done to address these challenges, most of the current solutions are designed for a static setting without considering the temporal information of the data (e.g. EHR). In this work, we propose a novel approach that uses non-PHI for linking patient longitudinal data. Specifically, our technique captures the diagnosis dependencies using patterns which are shown to provide important indications for linking patient records. Our solution can be used as a standalone technique to perform temporal record linkage using non-protected health information data or it can be combined with Privacy Preserving Record Linkage solutions (PPRL) when protected health information is available. In this case, our approach can solve ambiguities in results. Experimental evaluations on real datasets demonstrate the effectiveness of our technique.
SiM Other · 发表于 2017-03-16
Harvey Goldstein, Katie Harron, Mario Cortina‐Borja
摘要
With increasing availability of large datasets derived from administrative and other sources, there is an increasing demand for the successful linking of these to provide rich sources of data for further analysis. Variation in the quality of identifiers used to carry out linkage means that existing approaches are often based upon ‘probabilistic’ models, which are based on a number of assumptions, and can make heavy computational demands. In this paper, we suggest a new approach to classifying record pairs in linkage, based upon weights (scores) derived using a scaling algorithm. The proposed method does not rely on training data, is computationally fast, requires only moderate amounts of storage and has intuitive appeal. Copyright © 2017 John Wiley & Sons, Ltd.
SiM Clinical Trials Bayesian Methods · 发表于 2017-03-15
Graham M. Wheeler, Michael J. Sweeting, Adrian P. Mander
摘要
Phase I trials of anti‐cancer therapies aim to identify a maximum tolerated dose (MTD), defined as the dose that causes unacceptable toxicity in a target proportion of patients. Both rule‐based and model‐based methods have been proposed for MTD recommendation. The escalation with overdose control (EWOC) approach is a model‐based design where the dose assigned to the next patient is one that, given all available data, has a posterior probability of exceeding the MTD equal to a pre‐specified value known as the feasibility bound. The aim is to conservatively dose‐escalate and approach the MTD, avoiding severe overdosing early on in a trial. The EWOC approach has been applied in practice with the feasibility bound either fixed or varying throughout a trial, yet some of the methods may recommend incoherent dose‐escalation, that is, an increase in dose after observing severe toxicity at the current dose. We present examples where varying feasibility bounds have been used in practice, and propose a toxicity‐dependent feasibility bound approach that guarantees coherent dose‐escalation and incorporates the desirable features of other EWOC approaches. We show via detailed simulation studies that the toxicity‐dependent feasibility bound approach provides improved MTD recommendation properties to the original EWOC approach for both discrete and continuous doses across most dose‐toxicity scenarios, with comparable performance to other approaches without recommending incoherent dose escalation. © 2017 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.